Is it Really Climate Change or is it Sewage?

Fox River Sept 2015
Fox River Sept 2015
Fox River Sept 2015

Lately I’ve seen several presentations which all include a similar slide with a graph like the generic one I created below. All the presenters then refer to the graph on the slide and make a statement similar to this: “and because of climate change you can see an increase in flooding over the last several decades.” But with no supporting data ever offered to attribute this trend to climate change, these graphs have instead made me think the cause is most likely sewage.

Graph - for example only; not based on actual data
Graph – for example only; not based on actual data

So how do I get sewage out of this? Well, first it helps to have a background in the history of water distribution and wastewater treatment in the U.S. While some major cities began piping water to homes in the 1800s, construction of water distribution systems didn’t began in most areas until the early 1900s.  At this time, wastewater in most areas was still discharged without central collection or treatment. According to Urban Wastewater Management
in the United States: Past, Present, and Future, “By 1905, more than 95 percent of the urban population discharged their wastewater untreated to waterways. Little changed over the first quarter of the twentieth century,
and in 1924 more than 88 percent of the population in cities of over
100,000 continued to dispose of their wastewater directly to waterways.” Because this led to a non-centralized system, sewage was sometimes sent directly to a stream from multiple outlets and sometimes dispersed over land to eventually make its way to a stream.

All this began to change in the mid-1900s. The same publication cited above also noted Congress enacted  “the Water Pollution Control Act of 1948. The legislation provided for comprehensive planning, technical services, research, financial assistance, and enforcement. The Water Pollution Control Act was extended in 1952 and became permanent legislation in 1956.” There was a 1965 amendment to this act, and then eventually in 1972, Congress passed another Water Pollution Control Act.  The paper points out “the 1972 Act set the unprecedented goal of eliminating all water pollution by 1985 and authorized expenditures of $24.6 billion in research and construction grants.”

The result of this flurry of legislative activity between 1948 and 1972 resulted in the installation of centralized wastewater treatment systems in urban areas across the U.S. Today all discharges from each of these systems are regulated through permits from the USEPA primarily for water quality control. The discharges are typically introduced to a stream or other body of water directly from the treatment plant. Treatment discharges have the potential to range from less than 1 million gallons per day (MGD) to 1.44 billion gallons per day. That’s a lot of water entering our streams on a continuous basis which is why I immediately thought of wastewater as a cause when I saw the graph trending up after the mid 1900s.

Wastewater clarifier
Wastewater clarifier

Another reason I suspected wastewater had a major impact on stream flow was based on something I heard regarding the river flowing through our city. It seems in the past, people could walk across the river in the summer. As you can see in the photo of this river which I included at the start of this article, walking across the river today would most likely never be possible. In hearing this, there was no question in my mind that this was due to the wastewater discharges which now regularly flow into our river  and increase its base flow.

So during the last presentation I attended, I asked if impacts from wastewater discharges were considered or analyzed to see how much these flows are contributing to increased flooding. I explained if prior to installation of wastewater treatment plants, base flows of rivers could reduce to almost nothing, these streams would have had more capacity to handle rainfall events. But now with increased base flow due to wastewater discharges, which really started entering streams between 1948 and the 1980s and continue to do so and increase, the ability of streams to handle rainfall events has decreased. This could be a cause of rainfall events impacting greater areas and resulting in increased damages in suburban areas.  Also, as this USGS site shows, How Much Water Do We Use?, public water supply usage has increased over the years which would increase wastewater discharges even more. The presenter said they had never looked at the impacts of wastewater discharges.

As I continued to wonder about this, I looked online to see if others had thought of the impact of wastewater discharges on flooding events and discovered yes, they have. I even found studies which were done on the river in my community. H. Vernon Knapp, senior hydrologist with the Illinois State Water Survey, has developed at least two studies for the Fox River in Illinois which related to this topic. In his paper, the “Fox River Basin Streamflow Assessment Model: Hydrologic Analysis, October 1988,” he  analyzes the river flow taking into consideration impacts from effluent discharges from wastewater plants along the river. According to Knapp, in 1988, “approximately half of the low flows in the river upstream of these plants originated as effluent discharges from other facilities. Under these circumstances, the capacity of the Fox River to assimilate the additional effluents should be of concern.” His paper is also informative regarding other factors which can impact stream flow.

More recently Knapp developed a presentation, Effects of Future Water Demands and Climate Change on Fox River Water Availability. In it he states “watershed modeling suggests that the potential effect of climate change on Fox River low flows is considerably less than the effects of effluents and withdrawals, and thus does not substantially alter the water supply potential of the river.” He also notes “low flows in rivers such as the DesPlaines are almost 100% effluent.”

Perhaps not all increased flooding in all watersheds can be directly attributable to increased wastewater discharges since the 1940s, but I’m surprised it’s not always at least considered. Instead increased flooding events have been attributed to climate change, yet I could find no study which directly proves this. Most studies only look at the extent of flooding and make the leap with no specific data to back up the claim that this is due to increased precipitation brought on by climate change. A few studies I found also indicated there are too many factors other than just precipitation, such as antecedent water content, soil type, topography, etc., to conclusively make a direct correlation between increased rainfall and increased stream flow.

In the future, I hope to find more studies which do take into account the impacts of wastewater effluent on river flow and flood events to see if others have findings similar to Knapp’s.

 

 

 

 

.

Share

Running Toilets Get Their Own 5K Race!

Running Toilet
Catch a Running Toilet in a 5K Race Near You!

The EPA has been promoting Fix-a-Leak Week (March 16-22, 2015) for the past seven years. But like many issues in public works, sometimes it is difficult to drive awareness and attract people's attention to the message. Even with great social media resources and a topic that left ignored could mean a loss of money, it's still not easy for a message like this to stand out in today's constant stream of information. So some communities are taking a different and innovative approach by promoting the problem of running water with a 5K Run, and a few races will even include a running toilet.

If you manage a water system and have been looking for an idea for getting your message out about Fix-a-Leak, you can check out the races listed at the end of this post and consider organizing something similar in your own community. As the popularity of the race in Roswell, Ga., shows, your one event can end up reaching 800 people from your community. If the idea of a race is too much for your staff to manage on their own with the often limited time and resources available, you can follow the lead of Fort Worth, Texas, and partner with a local running group or club to help organize and host your run.

Many of the communities also enhance their event by incorporating social media. A few have created videos to promote their run (included with each listing below) or encouraged participants to use social media to post photos of themselves running in the race. Some of the races are themed and include a costume contest. At least one of the races offers a prize to a random person who posts on social media something they learned from the event. And others, including the one in Fort Worth, have also arranged for groups such as the EPA, local water conservation organizations, and local hardware or plumbing companies to set up information booths at the race. What better way to raise awareness, offer information, and have some fun!?

 

Races Promoting Fix-a-Leak Week:

Arizona

Peoria: One for Water 4-miler, Saturday, March 21, 2015

California

Santa Rosa: St. Patrick's Day 5K, Sunday, March 15, 2015

Georgia

Roswell: Water Drop Dash, Saturday, March 21, 2015

 

Texas

Fort Worth: Chasing Leaks 5K Run/Walk, Sunday, March 15, 2015

Plano: Chasing Leaks Fun Run, Saturday, March 14, 2015

Virginia

Charlottesville: Fix-A-Leak Family 5K, Sunday, March 22, 2015

 

Share

Augview – a Window to Your Underground Assets

 

Water Main Installation

Augview, founded by Michael Bundock in 2012 in New Zealand, is the first commercial, mobile application I have seen offered to the public works industry allowing utilities to geospatially capture, store, and display underground utilities in 3D through the use of a tablet or other mobile device. The software, through the use of GIS, will show operators their water, sewer, or other underground lines superimposed in 3D upon the ground in a geospatially accurate position. Users can then query the lines as with any other online GIS and access data about that utility such as size, material, age, and any other type of stored data. Or if a locator finds a discrepancy in a line's location or if he finds a new line, he can enter it into the software and immediately verify the updated or new location is accurate.

One example I can think of where I could have used this type of device was when we found a patched area in a roadway on one of our projects. It was one of those typical failures you find where you can see someone repaired something, but there's still something going on because a small hole opens back up with a void underneath. A lot of times this is caused by a hole in a sewer which allows soil above the pipe to wash away into the line leaving a void under the pavement. I knew the city had a sewer running along the roadway near that area, and I noticed a water shut off box nearby in the parkway. Because in our area the sewer lines used to be run with the water lines, I suspected it could be a failure with the building sewer. The business owner came out to comment on it and mentioned there had been a problem there, but it was difficult for me to tell for sure from what she explained if it had been the city sewer or the building owner's line. If I had Augview, I would have seen how all these lines related and where they were located. This visualization would have offered a better prediction of exactly which line could possibly have a failure. Of course public works professionals already try to make this determination using paper maps, but if it was the building owner's line, it is much easier to explain the problem to them using a 3D representation of everything rather than expect them to read a utility atlas.

I would have also liked to have an application like Augview for management of our water network. Our crews could have used the application to document the valve position when they opened or closed it. Then we could have just driven by to see if we had opened them all back up after we repaired the break, or we could have noticed when a valve between our pressure zones accidently was opened.

It would also be useful to use Augview to look at non-utility data for something like visualizing roadway ratings in the field. Then each year when we went out to rate the roadways, perhaps Augview could color the roadway based on the rating we assigned the year before in our GIS. This would prevent us from juggling paper maps in the truck while we are trying to also view and assess the pavement.

Past articles on this site have also imagined one day a product like Augview could be used to assist contractors as they build by displaying not only the underground lines but actually superimposing the plan onto the site. And I don't think it will be long before this type of implementation is extended to allow us to display real time data too. I can see one day we will be able to look up at the water tower and actually see the level of water in it or be able to see an indication at our water or wastewater plants of the flows running in and out and through each process. It would also be interesting to be able to drive by our lift stations and see the whole area colored red or green rather than just see the little red/green run light. This is also another facility that could display flows, seal failures, water levels or any other type of data.

While at the present time Augview has primarily been implemented in New Zealand, Melanie Langlotz,  business development manager, said she is "also looking for interested parties in the U.S. who can see the possibilities." So I believe it won't be long before we see Augview in use throughout the U.S. and other countries.

You can find out more about Augview by watching the video below or visiting their website or other social media sites:

Share

WATERCON2014

This year I am fortunate to again have the opportunity to attend WATERCON in Springfield, Ill.It's amazing how every year the conference offers so many great sessions, and the exhibitors always have such interesting displays and information. In addition to attending sessions and talking with vendors, I'll be posting as much as I can on several social media sites so that all of you can follow as much of the conference as possible. Because most of these sites are already listed in a blog post over at the Watercon blog site, I won't list them again here. Instead I encourage you to visit over there. And if you're attending too, I'll be looking for your own posts and photos from the event!

One added treat is a virtual expo we set up to try out that technology. Here's an image of the entry screen – you can find the link to visit the expo over on the Watercon site.

Watercon Virtual Expo Image 

Share

Hacking into SCADA

Water Plant Controls

Fortunately, for many years, the water and wastewater industry did not experience too many breaches on the digital front. But a few years back, the Stuxnet virus showed up and our digital innocence was shattered. When this happened, I was somewhat surprised because of the lack of previous attacks, but I never really heard how it all went down until last year when I sat in on a session at WATERCON 2013. When the topic came up the other day, I realized I'd never really shared exactly what I learned that day other than some rough notes I took on Cover-it-live and a general summary on the blog so figured I'd finally get around to posting that information today. 

The speaker, Michael Minkebige, a control systems engineer with Donohue and Associates started out by telling us we never really had problems in the past because hackers did not know very much about PLCs. But, he said "Stuxnet was a game changer." It was the first direct attack on PLC and HMI systems and also the first attack on governmental infrastructure from a physical angle because it was the first to destroy physical equipment. Minkebige said, "we've had other threats like denial of service but firewalls and antivirus software handled this." The other reason we were somewhat protected was because our systems and networks were old and isolated or were proprietary. He also said hackers were concentrating more on PCs – they were typically kids trying to cause trouble or break into banking systems. So basically he said we had "security through obsurity."

Then we heard about the Stuxnet attack in June of 2010. He said it was most likely deployed against Iran in 2009 by another governmental entity. Some person had picked up the virus on a USB stick and uploaded it into the Internet. There were 22,000 infections found in Iran and 6,700 in Indonesia. They suspect it took a team of 5 to 35 programmers 5 years to write the code for the virus. It is 500K bytes while most typical malware is only 10 to 15 K bytes.

The virus was spread through memory sticks and targeted Siemens PLCs and HMI software. From what Minkebige understood, the virus would "phone home" to a computer located most likely in Germany or Russia and reported what system it was on and then asked what it should do. The virus was programmed to self-destruct in June 2012. But if your antivirus found it, the virus would morph into something else. It also had two security certificates from Taiwan so it might also have appeared to be legitimate to an antivirus software program. When the virus did launch its attack it typically would change data or set points in the program. Then it would mis-report information about the operational data indicating it was operating at the correct levels or set points when it was not. A typical attack might change the speed of centrifuges by cycling them through great speed changes. There was a loss of 500 to 600 centrifuges because bearings were ripped out from this operational attack.

Unfortunately the code is now public knowledge. But there are some steps we have taken to protect our industry. Homeland Security (DHS) is on the lookout for attacks since water and wastewater plants in our country are vulnerable. And if Homeland Security recognizes an IP address from a suspect area accessing your system, the agency will notify your facility. The PLC industry has also added security to their systems. Operators are advised to keep up with patches for PLC systems. Industry organizations and societies are also publishing guidance. And DHS has released a document on how to secure your systems. We are advised to keep our systems off the Internet if possible. Otherwise, a firewall needs to be used for protection. Also, all systems should prohibit unauthorized memory devices from being used on PCs connected to your system, and you should lock out all USB connections to ensure they are not used. IT departments need to be made aware of this threat so they can monitor the systems for any suspicious activity. It's thought that future attacks might not necessarily be the Stuxnet virus, but an alteration of it.

Share

WATERCON 2013 – Day 3

And here we are already at the third full day of the conference. Today I started out in the exhibit hall talking to folks as they walked by the booth where we had a display of the #watercon Tweets. But I didn't have much time to chat before having to run off to the Mission Impossible session. As soon as I walked in the door and was handed a sealed envelope marked "Confidential," I realized this would be no ordinary activity. Upon opening the envelope, I discovered I had been assigned to a task force to determine five action points to address signficant water-related deficiencies in a community. Fortunately I was not alone in this endeavor – there were three other water professionals on my team who were obviously very experienced. It didn't take long for us to develop our recommendations. There were three other teams in the room working on the same assignment, and when we were all done, the moderators had us share our ideas. It was interesting to see that all the teams had come up with similar approaches. Well except our team had not thought of calling the National Guard. But, hey, as the one participant pointed out – they are there and available to help so why not use them. Afterwards we were all rewarded with candy for undertaking such a challenging assignment.

WATERCON 2013 Mission Impossible session

After we were released from our task force, I managed to catch the session on Green Infrastructure. While I could not live blog it, I did manage to share a few key points through Twitter (look for the #watercon hashtag to see the stream). The overall message from the panel of speakers is that green infrastructure is made up of complex elements. Designers are still figuring things out – particularly costs. And even though we have the International BMP Database, they cautioned trying to implement someone else's solution for your project without giving careful consideration to local conditions and factors. And finally they pointed out the operation and maintenance and monitoring of BMPs can be expensive.

Later in the afternoon, I caught the following sessions and was able to live blog them. Follow the link to run the CoverItLive tool to see the main points:

Who, What, When, Where and Why of Backflow Prevention – this was also a panel discussion about cross connections and backflow protection. It was interesting to hear the approaches and ideas from each community. Several members from the audience shared their experiences too. Make sure to run the live blog tool to see the tips and advice.

The New World of SCADA Security – this session provided an interesting view of why our operations had not experienced control security issues in the past and why they are more vulnerable now. The main point was "security through obscurity." Until 2010, hackers didn't really know about PLCs or how they operated. But because several programmers got together and wrote a program to hack into a PLC, launched it on another country's operations, and had their program picked up by someone whose actions led to the eventual release of it on the Internet, now anyone can get the code. Great.

I didn't really get a chance to talk to many vendors today – the booths had to be taken down at noon. Tomorrow is the awards breakfast and a few legislative sessions. But because I have some commitments at home, I unfortunately won't be able to attend. So I guess this wraps up my summary of WATERCON, but remember, since we captured so much of it online, you can always access the information by visiting the #watercon Tweets and reviewing the live blog sessions.

I very much appreciate ISAWWA sponsoring my registration and look forward to seeing everyone back next year!

Share